Nationwide · Worldwide

GoodSolar is power you use right where the sun lands.

On top of your van charging a battery on the go. On your roof. Running a garden pump. Shading your patio while it powers your lights. Small, close and simple: systems anyone can set up. Get creative, then tell us your project, wherever you are in the world.

20feet

Our rule: use it within 20 feet of the panels

GoodSolar makes its power and uses it in the same place: the panel, a short cable, and the thing it runs. Short runs waste less power, cost less to wire, and keep the whole system simple enough to set up yourself.

under 20 ft

Every place solar can work for you

Solar is not only a roof full of panels. Anywhere the sun reaches and something needs power within a few steps, a panel can do the job.

On top of your vehicle

Panels on the roof of a van, truck, RV or car top carrier charge a portable power station while you drive or park. EcoFlow-type battery systems give you power on the go: laptops, a fridge, lights, tools.

Your home: the basics

Panels on the roof or in the yard, a battery for the evening, power for the rooms closest to them. Start small with one circuit and grow.

The garden: run a pump

A panel wired straight to a small pump runs a fountain, fills a tank or waters the beds. It pumps when the sun shines, exactly when plants are thirstiest.

Shade that makes power

A pergola, carport, patio cover or awning with panels for a roof: cool shade underneath, power for the lights, fans and chargers beneath it.

Backup when the power goes out

A folding panel and a portable battery keep phones, a radio, medical devices and a few lights running through an outage.

Shed, workshop, garage

Lights and tool charging in an outbuilding, with no trench for a cable from the house.

Boats and docks

Keep the battery topped up, run the bilge pump and the lights at the mooring.

Camping and cabins

Off-grid weekends and remote cabins: lights, a fridge, charging, a water pump.

Lights on the path

Walkway, driveway, sign and flag lights that charge all day and come on at dusk.

Gates, cameras, alarms

Gate openers, security cameras and sensors far from an outlet, each with its own small panel.

Farms and ranches

Livestock water, electric fences, barn lights and well pumps where the power lines never reached.

A solar carport for your car

Park in the shade and top up an electric car or e-bike from the roof over it.

Systems anyone can install

Today's kits are built to be set up by the person who uses them. Panels fold, plug together and clip on. Portable power stations have the charge controller and the outlets built in. Here is the whole idea in six steps.

  1. Pick the job. What do you want to run, and for how many hours? A pump, lights, a fridge, a laptop.
  2. Find the sun. A spot with direct sun most of the day, within 20 feet of where the power is used.
  3. Size the panel. More watts of panel means more power per sunny hour. Start with what the job needs, and leave room to add.
  4. Store it. A battery or portable power station keeps the power for the evening. A pump or fan can run straight from the panel with no battery at all.
  5. Mount it. A roof rack, a ground stand, a pergola, a fence or a folding stand. Tilt it toward the sun.
  6. Plug in and use it. Short cable, matched plugs, done. Watch what it makes, and grow from there.

Anything wired into a building’s own electrical panel, or connected to the power grid, is a job for a licensed electrician and usually needs a permit. Small, self-contained kits like the ones above usually do not touch the house wiring at all. Check your local rules.

Plug-and-play battery systems

A portable power station is the easiest way into solar: a battery, the charge controller and the outlets in one box. Plug a panel into it, plug your things into it, done. No wiring skills needed. They come in three sizes.

Small
about 250 to 600 Wh

Phones, laptops, lights, a fan, a CPAP for a night. Carry it with one hand; one folding panel charges it.

Examples: EcoFlow RIVER line, Jackery Explorer (smaller models), Anker SOLIX C line, Goal Zero Yeti (smaller models).

Medium
about 1,000 to 2,000 Wh

A fridge, power tools, a coffee maker, a weekend in the van or a day of backup at home. One or two panels.

Examples: EcoFlow DELTA line, Jackery Explorer (larger models), Bluetti AC series, Anker SOLIX F line.

Large and expandable
about 3,000 Wh and up

Whole-room or home backup, add extra batteries as you go. Some can feed chosen home circuits through a transfer switch, which a licensed electrician installs.

Examples: EcoFlow DELTA Pro line, Bluetti larger AC models with extra batteries, Anker SOLIX F3800-class, Goal Zero Yeti larger models.

What to compare. Wh (watt-hours) is how much it stores; W (watts) is how much it can run at once. A 1,000 Wh station runs a 100 W load for roughly 10 hours, a little less in practice.
The solar input. Check the most solar watts and volts it accepts and its plug (often XT60, Anderson or a round DC plug; see Wires and plugs). Stay under the volt limit when you link panels.
Battery type and extras. LiFePO4 (lithium iron phosphate) batteries last many more charge cycles. Handy extras: charging and running at the same time, extra battery packs, and a car charging cable for the van.

Brands and product lines are named as examples of what is out there, not as endorsements; models and specifications change, so check the maker’s current sheet. GoodSolar is not affiliated with any of them.

Wires and plugs, made simple

This is the part that confuses most people. Here are the cables and connectors you will actually meet, what each one is for, and how they go together.

PV wire (solar cable)

Single-wire cable made to live outdoors: sun-proof, weather-proof. Most often 10 or 12 AWG in the US, 4 mm² or 6 mm² elsewhere. Red is usually positive (+), black negative (−).

MC4 connectors

The standard plug on almost every solar panel: a male and a female that click and lock together and keep the water out. Unlock them with the small MC4 tool. Never pull them apart while power is flowing.

MC4 branch (Y) connectors

Join two panels side by side (in parallel): two cables in, one out. One Y for the plus side, one for the minus side.

Inline fuse and DC breaker

A fuse inside an MC4 plug, or a DC breaker, protects the wire if something shorts. Put one on the positive side close to the battery.

XT60

A small yellow two-pin plug on the solar input of many portable power stations, including several EcoFlow models. An MC4-to-XT60 adapter cable connects regular panels to them.

Anderson connectors

Square red-and-black blocks (Anderson Powerpole and the larger SB style) used on many portable panels, batteries and vehicle setups. They fit either way round and come apart with a firm pull.

Round DC plugs

Some power stations take panels through a round barrel plug (sizes such as DC7909 or DC8020). Check your station’s manual for the exact size before buying an adapter.

Battery cables and ring lugs

Short, thick, fine-stranded copper with crimped rings that bolt onto the battery posts. The shorter and thicker, the less power is lost.

Series or parallel? In series (plus to minus, panel to panel) the volts add up. In parallel (plus to plus, minus to minus, with Y connectors) the amps add up. Keep the total volts under the input limit printed on your power station or charge controller, and leave room: panels make higher voltage on cold, sunny days.
Which wire size? More current or a longer run needs thicker wire (a smaller AWG number). Under 20 feet, sensible sizes lose very little power. That is the 20-foot rule at work.
Plus and minus. Check the + and − marks on the panel’s junction box and on every plug before you connect. Matching kits and adapter cables from the same maker take the guesswork out.

GET CREATIVE.

If something needs a little power and the sun can see it, there is a GoodSolar answer. A few to start you thinking:

The rolling officeRoof panels on a van feed a power station: laptop, router and coffee maker, anywhere you park.
The food truck that never idlesPanels on the roof run the fridge and the lights without a generator.
The pond that keeps itselfA panel-driven pump keeps the water moving all day.
The patio that pays you backA solar pergola shades the table and runs the string lights and the fans.
The greenhouse fanA panel on the greenhouse roof runs a vent fan exactly when it gets hot.
The market stallA folding panel and a battery for a card reader, lights and a phone.
The trailhead chargerA small solar station where hikers and riders top up their phones.
The bus stop at nightLit shelters and signs that charge by day, no trench, no meter.
Your ideaTell us below. The best ideas we hear go up on this page.

Tell us your solar project

Big or small, anywhere in the world. Tell us what you want to power and send a picture. Your project goes up as a job, and checked solar contractors bid a rough price to do the work, right here on the site.

United StatesCanadaMexicoEuropeLatin AmericaAfricaAsiaAustraliaAnywhere

Your details are kept private by GoodSolar and are never published.

Open solar jobs

Real projects from real people. Checked contractors bid a rough price right here, and the person with the job sees every bid. The picture of each job is shown to checked contractors only.

Loading the jobs…

Solar contractors: bid on jobs near you

Installers, electricians and handy people who do solar: sign up once, and bid a rough price on the jobs in your area. Every contractor is checked before the first bid: real name, company, telephone and license on file. Leads are priced by the size of the job.

Your key is kept on this device only. It shows the job pictures and lets you bid.